New to the Forum, NOT new to old celicas!

Please introduce yourself and Celica or ride(s).
Post Reply
User avatar
poutanen
Posts: 91
Joined: May 15th, 2012, 6:48 pm
Location: Calgary, AB, Canada

New to the Forum, NOT new to old celicas!

Post by poutanen »

Hey all, figure it's time I post in here... at the moment I've got a '77 RA29 that I'm starting to restore, but my history with old celicas goes back a LOT farther than that!

In 1997 when I was 16 I got my first car, an '82 Celica GT-S. I joined up with celicas.org on the old OCC mailing list long before online forums were around. Learned a lot from guys like Matti Kalalahti, Sean Figgins, Gary Meisner, etc.

Fast forward a couple years and I picked up a '78 RA4X coupe, but just wasn't feeling that car. Seven more cars, 15 years later, and a move from Ontario to Alberta, and I'm in the process of selling my '91 MR2 Turbo that's heavily modified (standalone EFI, disco potato, RMR intake manifold, custom A2W setup, etc. etc. etc. etc. etc.) I'm feeling the bug to have a project again. The MR2 was fun but it was too complete and too easy, just ready to drive everywhere...

So I found myself an old '77 Celica in central Alberta last weekend, picked it up on a trailer (wouldn't start) and get the thing back down to Calgary. Haven't had much time to work on it this week, as I'm getting everything buttoned up on the MR2 to be picked up tonight, but I did find that it was just a loose wire on the starter. She starts right up and purrs like a kitten! It has weber sidedraft carbs and a header already, but the body is rough and the interior trashed.

I plan on leaving the 20R in there, or possibly doing a 20/22R hybrid. (a 1UZ is a VERY remote possibility). I want to do a complete resto on the body, and take the interior to a local shop to have it recovered/repaired, etc. I've already ordered complete new brakes (drums, rotors, shoes, pads, calipers, wheel cylinders, master cyl) and both clutch cylinders. The existing stuff feels spongy and has likely had the same fluid in it for years. Considering I'm planning on the occasional autocross, I want everything to be in good order.

Anyway, I'll start a new thread for the build/resto itself, but just wanted to say hi! :wave:
Current: '77 RA24 resto

Former: '77 Celica RA29, '78 Celica Coupe, '82 Celica GT-S, '85 Supra w/6M-GE, '85 MR2, '87 MR2, '89 MR2SC, '91 MR2 Turbo (w/290 RWHP), '92 Lexus SC400, '92 Camry 4 cyl (RIP, died at 455,000 km), '87 Camry $300 beater
User avatar
toyboyracer
Posts: 1371
Joined: May 17th, 2009, 10:20 pm
Location: BRISBANE Orstrayla-Where Celicas roam FREE in my back yard!
Contact:

Re: New to the Forum, NOT new to old celicas!

Post by toyboyracer »

G'day from 1/2 way around the World > Australia calling :cheers:

I hope your "Moose" 29 has s_m_i_l_e_y bumper bars & not USDM "park bench" ones ! :lol2:

Welcome.
Was 18 once - A long time ago... In a '66 Holden far far away...
B.C.S - Brisbane Celica Spares

Image


GORDON @ celica-spares@hotmail.com
User avatar
poutanen
Posts: 91
Joined: May 15th, 2012, 6:48 pm
Location: Calgary, AB, Canada

Re: New to the Forum, NOT new to old celicas!

Post by poutanen »

Here's your answer... :cry: lol

Smiley's seem bloody expensive here, so I'm thinking about going with fibreglass smileys.

Image
Current: '77 RA24 resto

Former: '77 Celica RA29, '78 Celica Coupe, '82 Celica GT-S, '85 Supra w/6M-GE, '85 MR2, '87 MR2, '89 MR2SC, '91 MR2 Turbo (w/290 RWHP), '92 Lexus SC400, '92 Camry 4 cyl (RIP, died at 455,000 km), '87 Camry $300 beater
User avatar
toyboyracer
Posts: 1371
Joined: May 17th, 2009, 10:20 pm
Location: BRISBANE Orstrayla-Where Celicas roam FREE in my back yard!
Contact:

Re: New to the Forum, NOT new to old celicas!

Post by toyboyracer »

Even where Celicas roam free here in everyones back yards, VGC bars are pretty much non existent now.

We'll also have to resort to the fiberglass ones soon ! :nonono:
Was 18 once - A long time ago... In a '66 Holden far far away...
B.C.S - Brisbane Celica Spares

Image


GORDON @ celica-spares@hotmail.com
taman86
Posts: 397
Joined: April 20th, 2012, 12:03 pm
Location: SE AZ

Re: New to the Forum, NOT new to old celicas!

Post by taman86 »

that 77 body seems to be in fairly decent condition from the pic. are there major rust spots? i like the wheels also.
00 T/A ws6- bolt on's- sold
01 T/A ws6-cam only- sold
04 Scion Xa auto- Bolt on's- SOLD
05 Dodge Ram 1500 Big Horn Edition Quad Cab- Awesome
2012 BLK GMC Terrain SLT-1 package 3.0 v6 FWD- Family hauler
77 Celica GT liftback- Shiro Doragon
User avatar
poutanen
Posts: 91
Joined: May 15th, 2012, 6:48 pm
Location: Calgary, AB, Canada

Re: New to the Forum, NOT new to old celicas!

Post by poutanen »

taman86 wrote:that 77 body seems to be in fairly decent condition from the pic. are there major rust spots? i like the wheels also.
Thanks man, there is a dent in the rear quarter that looks like it was hit with a baseball bat, the lower part of the rear hatch is rusted badly, and the rear part of each rocker panel is rotten. Other than that it's not bad.

Which brings me to another question I'm wrestling with tonight. Do I go balls to the wall, strip the entire car down to just body, sandblast and repaint the entire thing? Or do I perform a more surgical operation, leaving the engine and the rest of the drivetrain in place (stripping the interior and body panels of course) and just remove the cancer, weld in new metal and repaint? I'd be doing 90% of the work myself so cost would be similar with both options, it's just the full on restoration would be a LOT of work.

On the other hand it wouldn't be that hard to strip a celica! I'm used to working on the MR2 where there were three heat exhangers (rad, I/C core, I/C heat exchanger), multiple pumps, etc. etc. etc.

I wish there was somebody reasonable in price that would do the resto for me!!! lol :banghead2:
Current: '77 RA24 resto

Former: '77 Celica RA29, '78 Celica Coupe, '82 Celica GT-S, '85 Supra w/6M-GE, '85 MR2, '87 MR2, '89 MR2SC, '91 MR2 Turbo (w/290 RWHP), '92 Lexus SC400, '92 Camry 4 cyl (RIP, died at 455,000 km), '87 Camry $300 beater
taman86
Posts: 397
Joined: April 20th, 2012, 12:03 pm
Location: SE AZ

Re: New to the Forum, NOT new to old celicas!

Post by taman86 »

well for me not having a garage or shop, just fixing the problems and doing just whats necessary to get it fixed. if you have the means and time to do a full teardown, an enclosed area ti sandblast and paint then ide say go for it. i say that it is A LOT of work and things can break and be lost in this process where as if you are only repairing the skin then you dont really have to tear into it too bad.

i think it comes down to time, experience, and resources available. there are a lot of people that think they can do this over a certain period of time, gain experience as they go, and dive in with a hope and prayer it all goes well to fit within a tight budget. 6 months later its barely torn down and they realize itll take another year or more to be put back together.
00 T/A ws6- bolt on's- sold
01 T/A ws6-cam only- sold
04 Scion Xa auto- Bolt on's- SOLD
05 Dodge Ram 1500 Big Horn Edition Quad Cab- Awesome
2012 BLK GMC Terrain SLT-1 package 3.0 v6 FWD- Family hauler
77 Celica GT liftback- Shiro Doragon
User avatar
poutanen
Posts: 91
Joined: May 15th, 2012, 6:48 pm
Location: Calgary, AB, Canada

Re: New to the Forum, NOT new to old celicas!

Post by poutanen »

Yeah that's exactly what I'm thinking... I've done some pretty heavy work on cars, but it's all the little details that would make a full restoration take forever. I've been reading a blog about a guy that's been doing one for the last 3 years. I bought this car to drive it, not work on it, so I'm leaning towards a patch job as far as the rust goes, and then a full sand and repaint the exterior.

Just bought a MIG welder tonight and haven't used one in about 12 years, turns out I'm not as bad as I thought I'd be! Had to weld a new flange on the header as the old one had cracked and was leaking badly. The GF wants me to finish up for the night now otherwise I'd keep going! I want to get her on the road in the next could weeks, then take her to some auto-x races and have some fun, then I'll spend weekends fixing the rust, and one long weekend mid summer I'll strip and paint her! :ohyeah:

At least that way I can get away with just buying new exterior rubber and leaving the rest of the car in place.

Thanks again! :cheers:
Current: '77 RA24 resto

Former: '77 Celica RA29, '78 Celica Coupe, '82 Celica GT-S, '85 Supra w/6M-GE, '85 MR2, '87 MR2, '89 MR2SC, '91 MR2 Turbo (w/290 RWHP), '92 Lexus SC400, '92 Camry 4 cyl (RIP, died at 455,000 km), '87 Camry $300 beater
User avatar
toyboyracer
Posts: 1371
Joined: May 17th, 2009, 10:20 pm
Location: BRISBANE Orstrayla-Where Celicas roam FREE in my back yard!
Contact:

Re: New to the Forum, NOT new to old celicas!

Post by toyboyracer »

The GF wants me to finish up for the night now otherwise I'd keep going!
I want to get her on the road in the next could weeks, then take her to some auto-x races and have some fun,
then I'll spend weekends fixing the rust, and one long weekend mid summer I'll strip and paint her!
ummm... You need to phrase things better there - I blew cola out my nose reading that ! :lol2: :lol2:
Was 18 once - A long time ago... In a '66 Holden far far away...
B.C.S - Brisbane Celica Spares

Image


GORDON @ celica-spares@hotmail.com
User avatar
poutanen
Posts: 91
Joined: May 15th, 2012, 6:48 pm
Location: Calgary, AB, Canada

Re: New to the Forum, NOT new to old celicas!

Post by poutanen »

toyboyracer wrote:ummm... You need to phrase things better there - I blew cola out my nose reading that ! :lol2: :lol2:
:banghead2:

WOW! I think I was a little woozy last night when I wrote that! :lol: :lol: :lol:
Current: '77 RA24 resto

Former: '77 Celica RA29, '78 Celica Coupe, '82 Celica GT-S, '85 Supra w/6M-GE, '85 MR2, '87 MR2, '89 MR2SC, '91 MR2 Turbo (w/290 RWHP), '92 Lexus SC400, '92 Camry 4 cyl (RIP, died at 455,000 km), '87 Camry $300 beater
taman86
Posts: 397
Joined: April 20th, 2012, 12:03 pm
Location: SE AZ

Re: New to the Forum, NOT new to old celicas!

Post by taman86 »

Lmao, didn't notice it until you pointed it out. If it were me, I would do what you're thinking. Just patch it up and do what is necessary and have fun with it. Keep up the build pics and how it turns out. GL
00 T/A ws6- bolt on's- sold
01 T/A ws6-cam only- sold
04 Scion Xa auto- Bolt on's- SOLD
05 Dodge Ram 1500 Big Horn Edition Quad Cab- Awesome
2012 BLK GMC Terrain SLT-1 package 3.0 v6 FWD- Family hauler
77 Celica GT liftback- Shiro Doragon
User avatar
poutanen
Posts: 91
Joined: May 15th, 2012, 6:48 pm
Location: Calgary, AB, Canada

Re: New to the Forum, NOT new to old celicas!

Post by poutanen »

Thanks guys! Had good luck with the el-cheapo Princess Auto welder. Basically recreated a flange on the header from scratch. Started her up and she sounds tons better! Let it idle for a while and there was a minor coolant drip. I found the hose to the overflow bottle was blocked, and one of the seals in the rad cap was cracked. Cleaned out the hose to the overflow and ran a little stop leak in the rad (I know I know) and no more drip so it was a successful day!
Current: '77 RA24 resto

Former: '77 Celica RA29, '78 Celica Coupe, '82 Celica GT-S, '85 Supra w/6M-GE, '85 MR2, '87 MR2, '89 MR2SC, '91 MR2 Turbo (w/290 RWHP), '92 Lexus SC400, '92 Camry 4 cyl (RIP, died at 455,000 km), '87 Camry $300 beater
User avatar
poutanen
Posts: 91
Joined: May 15th, 2012, 6:48 pm
Location: Calgary, AB, Canada

Re: New to the Forum, NOT new to old celicas!

Post by poutanen »

FYI - Since the last post I've done a fair bit (no pics to post at this point). I've stripped the interior expect for the dash, removed all the sound deadening material, and am ready to sandblast all the rust on the inside and start welding new metal in.

I also picked up a MKI Supra rear axle to throw in there in prep for an eventual engine swap!!! :ohyeah:
Current: '77 RA24 resto

Former: '77 Celica RA29, '78 Celica Coupe, '82 Celica GT-S, '85 Supra w/6M-GE, '85 MR2, '87 MR2, '89 MR2SC, '91 MR2 Turbo (w/290 RWHP), '92 Lexus SC400, '92 Camry 4 cyl (RIP, died at 455,000 km), '87 Camry $300 beater
Post Reply